How to review child-resistant packaging test evidence
A report can describe a similar-looking tin and still cover a different closure. Match the proposed assembly to the report sample before relying on its results.
Latest guides
Continue your review

Identify the proposed assembly
Record the model, size, lid, liner, insert and intended market. Ask for the report that identifies the assembly being considered and record the report number and revision.
Match the report to the order
Compare the report's sample identification and photos with the drawing and physical sample. Where a lid is listed separately, verify the mating body as part of the configuration.
| Check | Evidence to request | How to use it |
|---|---|---|
| Identity | Report number, revision, model and sample photos | Ask for the complete report if only a certificate is supplied. |
| Assembly | Body, closure, liner and insert if applicable | Ask the supplier to explain any difference in writing. |
| Applicability | Referenced method, market and tested configuration | Ask the responsible reviewer to confirm the evidence needed before release. |
Resolve differences before approval
Flag any change to the body, closure, liner or operating mechanism. Ask the supplier to explain report applicability in writing and record any open questions for your quality team.
Review opening instructions on the exact tin sample
For a cannabis brand reviewing a button, slider or hinged tin, ask the supplier to demonstrate the proposed assembly and provide its operating instructions. Match the demonstration, drawing and instructions to the sample ID. Ask the quality reviewer to establish the applicable test evidence for the destination market and configuration.

Observe how adults follow the instructions
Give an adult reviewer the sample and the instructions intended for the finished pack. Let them attempt the sequence before providing a demonstration. Record where they pause, change their grip or ask for help. Use the observations to improve the wording, position of the instructions or proposed mechanism, and repeat the review after a change.
Ask the product team which adult users and handling conditions the review should represent. If users report difficulty operating controls together, document the step and sample involved and ask the supplier to review options. Have changes to the mechanism, components or operating instructions assessed for their effect on the required evidence before production release.
Request a sample and document review| Check | What to observe and retain |
|---|---|
| Find the instructions | Location, contrast and readability on the actual printed pack |
| Identify the actions | Whether the instructions identify the correct controls and direction |
| Complete the sequence | Required simultaneous actions, grip changes, attempts and assistance |
| Open and reclose a loaded pack | Contact with contents or insert and observable closure engagement |
| Trace the evidence | Sample ID, component revisions, instruction revision and applicable report reference |
Buyer FAQ
Can I reuse a report after the closure changes?
Have the proposed assembly reviewed against the tested sample and confirm what additional evidence is needed for the change.
How should two-button instructions be written?
Describe the actual actions demonstrated on the specific sample, including whether controls must be operated together and how the lid or tray then moves. Verify the sequence with the supplier before adding arrows or an opening diagram.
Does a successful internal opening trial establish certification?
Use the trial to document usability observations and instruction changes. Obtain the applicable test documentation and have the responsible reviewer confirm its coverage of the quoted assembly.
What should accompany a request for revised instructions?
Send the sample ID, a photo of the instructions and a record of the difficult step. Ask for a revised instruction proof, confirmation of the affected configuration and the evidence needed for release. Request a sample and document review.





LID-D35x17.7Hmm Metal Lid for Glass Jars for concentrates