Skip to content
LOCK & ROLL CAN PACK

How to compare tin dimensions

Two tins with the same listed size can fit different products. Compare the usable cavity with the insert installed and confirm the lid clears a loaded sample.

Calipers, an open metal tin and packaging drawings in a fit-review illustration

Measure the contents first

Record the longest, widest and tallest item as it will actually be packed, including wrappers or caps. For a multi-item pack, sketch the orientation and spacing. For round containers, capture the maximum diameter and height.

Read the catalogue size as a starting point

Compare listed dimensions within the same format. The 75 × 25 × 78 mm slim tin and 60 × 60 × 26 mm shaped tin have different profiles. Use the drawing to confirm what each axis measures and how much room remains inside.

Which measurements belong on the fit check?
CheckEvidence to requestHow to use it
Shelf envelopeMaximum closed outside dimensionsCheck carton, display or equipment clearance.
Loading spaceNarrowest usable width or diameter and length with the insert fittedCheck the largest finished item in its actual loading orientation.
Closing spaceClearance below the fully closed lidClose and reopen a filled sample without forcing it.

Check the assembled clearance

Ask for usable inside dimensions at the narrowest point, with the proposed insert and lid installed. Check corner radii, the opening and the path the product takes during loading. Approve fit with a loaded sample.

Example: A tray fits on paper but binds at the corners

If a rectangular tray is sized from the broadest internal width, it can contact the rounded corners before it reaches its seating height. Ask for the usable width at the intended seat and compare the corner profile on the tray and tin drawings.

Trial the loaded tray in a representative tin. If it rocks or the lid presses on the tallest item, record where it contacts, revise the drawing or insert, and repeat the fit check before approval.

Buyer FAQ

Can I order from outside dimensions alone?

Use them to shortlist formats. Ask for the configuration drawing and check the usable interior with the proposed insert before release.

Related products

Related product categories

Related applications